HOW TO SETUP MERCUSYS WIFI EXTENDER?

MERCUSYS is a reliable connection device provider that focuses on providing the essential equipment that is the backbone of any linked lifestyle. Many users have trouble with limited Wi-Fi coverage. Most families use only one router at residence to connect to the internet, but sometimes that isn’t enough to get a strong signal and fast Wi-Fi everywhere. When that happens, you need a repeater to make your Wi-Fi reach where you want it to. MERCUSYS is the perfect way to get rid of Wi-Fi dead zones. To setup MERCUSYS WiFi Extender, follow this article:

SETUP USING WPS

  • Plug the MERCUSYS extender into the power outlet next to the router & wait till the Sensor LED is illuminated and solid red.
  • Press your router’s WPS button.
  • Click the extender’s WPS button.
  • Within 2 minutes, a LED must stop blinking and hold steady.
  • This implies that the WPS connection did work.
  • Move your extender to get the best Wi-Fi range and performance. 

SETUP MERCUSYS EXTENDER VIA WEB BROWSER

  • Attach your computer or phone to the network of the extender. MERCUSYS RE XXXX.
  • If your computer has an Ethernet cable, unplug it.
  • Setup MERCUSYS extender to your host extender by following the instructions in the Quick Setup Wizard.
  • Open a web browser and within the address bar, type http://mwlogin.net. Make a password so you can get in.
  • Select the 2.4GHz SSID (present framework) from the list that corresponds to your host router.
  • Noteworthy: if the network you wish to join is not on the list, move the extender nearer to the router & select “Rescan” at the bottom of the list. This will allow you to find the network.
  • Enter the password for the host router here. Click the Next button after either sticking with the default SSID, which is the SSID of a host router, or changing this to fit the extended network.
  • Worth noting: The password for your host and extender networks are the same.
  • Look at your Mercusys extender‘s Signal LED. Solid green or orange means the connection worked.
  • Move your extender to get the best Wi-Fi range and performance.

RESET MERCUSYS WIFI EXTENDER

  1.  OPTION 1
    • After turning on the extender, press and hold the RESET button for five seconds, or until the Signal LED blinks rapidly. After that, you can release the button.
    • After using a web browser to log into the extender’s web management page, navigate to System Tools> Default Factory Rebooting, and click the Factory Default Restore button.
  1.     OPTION 2
    • After navigating to System Tools > Reboot, you will see a button labelled Reboot. Clicking this button will cause the extender just on-page to be rebooted.
    • After performing a reboot, specific configurations of the extender would become active, including the following:
    • Upgrade the extender’s firmware as soon as possible (the system will RESET automatically)
    • Bring the extender’s settings back to their initial, factory-default state (the system will RESET automatically)
    • Perform the necessary updates to the configuration that uses the file (the system will RESET automatically)

FAQ

WHAT TO DO IF I CAN’T REMEMBER THE PASSWORD TO MY ACCOUNT?

Restore the configuration of the extender to its default settings and then, when prompted, choose a new password for it.

HOW TO UPGRADE EXTENDER’S FIRMWARE?

You could indeed update the MERCUSYS extender’s firmware to the most recent version by going to System Tools and then clicking on the “Firmware Upgrade” option.

The Hardware Version button will display the most recent version of the hardware. The edition of the update file must be compatible with the most recent hardware version of the extender.

  • The “Firmware Version” click will display the current firmware version if it is available.
  • You must keep the power on to the extender throughout the process to prevent any damage.
  • You can get the most recent file to upgrade the firmware by visiting our website (http://www.mercusys.com).
  • To find the firmware file you downloaded, click the Browse button and then make your selection.
  • Click Upgrade.
  • Following the completion of the upgrade, the extender will restart on its own.

Also Read:

How to Reset Powerbeats pro?

HOW TO SETUP COMFAST EXTENDER?

By Sadmin

Leave a Reply