Many people like Netgear range extenders because of their ability to fill dead spots with lightning-fast WiFi. After adding a Netgear extender to an existing networking device, you can use the internet on more than one device. When the Netgear extender stops working and you can’t get online, life can feel like a curse. This bug prevents numerous online operations, such as login into a Netgear extender and updating its settings.

If you’re having a similar problem, it’s vital that you identify its root cause before attempting to fix it. This post has all the information you’ll need to fully understand the problem. Then, please continue reading.

Have trouble getting your Netgear router online?

Your Netgear range extender might not be able to connect to the internet for a number of reasons. There are many reasons for this, but some of the most frequent are:

1. a low quality signal: Your extender may not be able to connect to the internet if it is located too far from your router.
2. Issues with the Wi-Fi network configuration: Verify that the Wi-Fi settings on your range extender are set up properly. Verify that the SSID and password you’re using match what’s set up on your router.
3. Software bugs: If your extender’s software is out of date or broken, it might not be able to connect to your network.
4. Overloaded networks: If you have too many devices sharing your network, your extender might not be able to connect to the internet.
5. Trouble with the hardware: It’s possible that your extender won’t connect to the internet because of a hardware problem, like a broken Ethernet cable or a defective transmitter.

If your Netgear extender still won’t connect to the internet after you’ve tried to fix these common problems, you may have a more complicated problem that needs more troubleshooting or technical help from Netgear customer service.

[Fix] Internet won’t connect using a Netgear range extender

If your Netgear extender has trouble connecting to a network, try the following steps to fix the problem:

1. Make sure the extender is in the correct position: Place your range extender where it will get the best possible signal from your network.
2. First, make sure your router and extender are properly connected: You should double check that the Ethernet wire connecting your extender to the router is securely attached.
3. Reboot the range extender: You should unplug the extender for ten to fifteen seconds before reconnecting it.
4. Confirm that your Wi-Fi range extender’s settings are correct: Verify that your WiFi range extender’s settings are accurate. Verify that your Wi-SSID ID and password are enter correctly and match those of your router.
5. Return your range extender to its original settings: If nothing else seems to work, you can always try resetting your extender to factory defaults. If you have made any changes to the settings, be aware that they will be lost if you do this.
6. Keep the extender’s firmware up to date: If your extender has a firmware update available, you can find it on the Netgear website. If your extender can’t connect to the internet because of a known fault, changing the firmware can cure it.
7. Make sure your wifi extender is on a different channel: There could be interference with your extender if there are a lot of other wireless devices in the neighbourhood. If you’re experiencing interference with your wireless extender, try switching the channel.
8. Please contact Netgear’s support team: Get in touch with Netgear support if none of the previous steps help. If that doesn’t work, they’ll offer more troubleshooting advice or replace it.

Also Read: Wifi Extender Setup Netgear

The post Internet won’t connect to the Netgear extender appeared first on Smart WiFi Plus.